Herringbone Wallpaper in Blush
- Hand-screened wallpaper
- Substrate: clay coated paper
- Width: 30″ (trims to 27″)
- Vertical repeat: 5″
- Horizontal repeat: 4.5"
- Sold by the double roll (10 yards)
- 2 double roll minimum
Before hanging your wallpaper, make sure that the surface is clean, smooth, and dry. Old wall coverings should be completely removed. A clear, non- staining, ready-mixed adhesive is recommended.
Our screen printed wallpaper is non-pasted and should be installed using a traditional hanging method. Paste the back of the wallpaper using a roller brush. Fold the pasted side together (aka 'book') and let stand for 5-7 minutes. This will keep the seams from opening up and drying out while the paper is setting.
Match the pattern on the wall at eye level and put the seams tightly against each other - do not overlap. Use a wallpaper brush or a smoothing tool to gently work the paper onto the wall working from the top and middle, down and out. All hand-screened papers suggest a 1/8" allowance in matching.
Clean with warm water and a sponge, taking care to remove all the paste from the surface. Rinse thoroughly a second time with clean, warm water. After hanging 2 strips, be sure to check for any defects before proceeding.
*Please note, wallpaper cannot be accepted for return due to improper installation. Ensure rolls are undamaged and are the correct quantity, pattern, and color before you begin. It is the customer’s responsibility to inform Krane Home of any incorrect or damaged product as no claims can be entertained for any part of the order after cutting and hanging.